Automatic Parts Washers are available in 110 volt, 220 single and 3 phase as well as 460 and 575 volt 3 phase machines. A fresh water garden hose is used to initially fill the sump. Or, with the optional auto fill feature, the hose can be left connected. Your standard city or well line pressure is all that is needed to fill the sump.
It depends upon what you're washing as well as your local waste water codes. Give us a call for a free consultation on your local ordinances.
It depends on the size of the parts you are cleaning. On the front-load automatic parts washer models, the internal load height is 30” to 60” with a load capacity ranging from 500 pounds to 2,500 pounds. Choosing a two-tier turntable model adds a second turntable for greater parts washing capacity.
For the top-load automatic parts washers, the working height is 16” to 18” with a 500 pound load capacity.
Unlike traditional parts washers, Hotsy’s space saving internal roll-away door saves floor space and prevents wash water from dripping on the shop floor. Hotsy also has a recessed base which provides ample foot clearance for easy loading and unloading. The actual dimensions range from 43 to 78.5-inches wide by 49 to 90-inches deep on the larger front-loading models, and 34 to 40-inches wide by 44 to 50.5-inches deep on the top-loading models.
No. Hotsy parts washers utilize safe, water-based cleaning that eliminates potential health hazards and solvent disposal problems. However, Hotsy offers a full line of specially formulated industrial detergents for use in aqueous parts washers, customized for specific cleaning applications. Hotsy detergent is available in pails, drums, bulk packs and tote size. If you think you'll be needing to use detergent, we are happy to help you determine the best detergent to meet both local waste water codes and your cleaning needs.